Tariff Changes

All headings › Chapter 84 › 8465

Machine tools (including machines for nailing, stapling, glueing or otherwise… (HTS 8465) duty rate from China

Goods in HTS heading 8465 (Machine tools (including machines for nailing, stapling, glueing or otherwise…) from China pay the general duty in the tariff schedule plus Section 301 12.5% and Section 301 25% and Section 301 7.5%. Across the 78 lines below the percentage total runs from 22.4% to 40.5%. Section 232 is added to the totals only where a plain percentage applies to the line and the country (conditional and country-deal rates are listed, not added), we found no IEEPA duty in force, and antidumping duties are not checked here.

Landed-cost calculator

Duty by line

Pick your own 10-digit code from your classification or broker: the rate that applies to you is the one on your line. The last column is the percentage part only, on $10,000 of customs value.

CodeProductGeneral rateAdded dutiesTotal percentageOn $10,000
8465.10.00.05Used or rebuilt › Tenoners2.4%12.5% Section 301
25% Section 301
39.9%$3,990.00
8465.10.00.15Used or rebuilt › Other2.4%12.5% Section 301
25% Section 301
39.9%$3,990.00
8465.10.00.25Machines which can carry out different types of machining operations without tool change between such operations › Numerically controlled2.4%12.5% Section 301
25% Section 301
39.9%$3,990.00
8465.10.00.35Machines which can carry out different types of machining operations without tool change between such operations › Other2.4%12.5% Section 301
25% Section 301
39.9%$3,990.00
8465.10.00.45Other › Other2.4%12.5% Section 301
25% Section 301
39.9%$3,990.00
8465.10.00.50Machines which can carry out different types of machining operations without tool change between such operations › Other2.4%12.5% Section 301
25% Section 301
39.9%$3,990.00
8465.20.10.00Machining centers › For sawing, planing, milling, molding, grinding, sanding, polishing, drilling or mortising3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.20.50.00Machining centers › For bending or assembling2.9%12.5% Section 301
25% Section 301
40.4%$4,040.00
8465.20.80.00Machining centers › Other2.4%12.5% Section 301
25% Section 301
39.9%$3,990.00
8465.91.00.02Used or rebuilt › Rip saws3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.06Used or rebuilt › Panel saws3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.12Used or rebuilt › Band saws3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.16Used or rebuilt › Cross-cut and optimizing saws3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.22Used or rebuilt › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.27Other › Sawmill machines3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.32Sawing machines › Radial arm saws3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.36Sawing machines › Tilting arbor table saws3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.41Sawing machines › Rip saws3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.47Sawing machines › Miter saws3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.49Sawing machines › Scroll saws3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.53Sawing machines › Valued under $3,000 each3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.58Sawing machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.64Sawing machines › Valued under $1,000 each3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.68Sawing machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.74Sawing machines › Cross-cut and optimizing saws3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.78Sawing machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.91.00.91Sawing machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.03Used or rebuilt › Moulders3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.06Used or rebuilt › Routers3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.16Used or rebuilt › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.26Planing, milling or molding (by cutting) machines › Valued under $3,000 each3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.29Planing, milling or molding (by cutting) machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.31Other › Moulders3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.34Planing, milling or molding (by cutting) machines › Valued under $1,000 each3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.37Planing, milling or molding (by cutting) machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.42Planing, milling or molding (by cutting) machines › Valued under $1,000 each3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.46Planing, milling or molding (by cutting) machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.51Planing, milling or molding (by cutting) machines › Valued under $3,000 each3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.55Planing, milling or molding (by cutting) machines › Numerically controlled3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.58Planing, milling or molding (by cutting) machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.62Planing, milling or molding (by cutting) machines › Valued under $1,000 each3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.66Planing, milling or molding (by cutting) machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.72Other › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.92.00.91Planing, milling or molding (by cutting) machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.93.00.04Used or rebuilt › Belt sanders, for a belt width 60 cm or wider3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.93.00.12Used or rebuilt › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.93.00.30Grinding, sanding or polishing machines › Valued under $1,000 each3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.93.00.45Grinding, sanding or polishing machines › Valued $1,000 or over but under $3,000 each3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.93.00.55Grinding, sanding or polishing machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.93.00.65Other › Belt sanders, for a belt width 60 cm or wider3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.93.00.75Other › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.93.00.91Grinding, sanding or polishing machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.94.00.05For woodworking › Used or rebuilt2.9%12.5% Section 301
25% Section 301
40.4%$4,040.00
8465.94.00.15Bending or assembling machines › Doweling machines2.9%12.5% Section 301
25% Section 301
40.4%$4,040.00
8465.94.00.25Bending or assembling machines › Edgebanding machines2.9%12.5% Section 301
25% Section 301
40.4%$4,040.00
8465.94.00.35Bending or assembling machines › Laminating machines2.9%12.5% Section 301
25% Section 301
40.4%$4,040.00
8465.94.00.45Bending or assembling machines › Cold2.9%12.5% Section 301
25% Section 301
40.4%$4,040.00
8465.94.00.55Bending or assembling machines › Other2.9%12.5% Section 301
25% Section 301
40.4%$4,040.00
8465.94.00.65Bending or assembling machines › Other2.9%12.5% Section 301
25% Section 301
40.4%$4,040.00
8465.94.00.91Bending or assembling machines › Other2.9%12.5% Section 301
25% Section 301
40.4%$4,040.00
8465.95.00.05Used or rebuilt › Numerically controlled boring machines3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.95.00.10Used or rebuilt › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.95.00.20Drilling or mortising machines › Numerically controlled3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.95.00.35Drilling or mortising machines › Valued under $3,000 each3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.95.00.45Drilling or mortising machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.95.00.55Drilling or mortising machines › Valued under $1,000 each3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.95.00.60Drilling or mortising machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.95.00.65Other › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.95.00.91Drilling or mortising machines › Other3%12.5% Section 301
25% Section 301
40.5%$4,050.00
8465.96.00.15For woodworking › Log splitters2.4%12.5% Section 301
7.5% Section 301
22.4%$2,240.00
8465.96.00.25For woodworking › Chippers2.4%12.5% Section 301
7.5% Section 301
22.4%$2,240.00
8465.96.00.30For woodworking › Hogs2.4%12.5% Section 301
7.5% Section 301
22.4%$2,240.00
8465.96.00.40For woodworking › Other2.4%12.5% Section 301
7.5% Section 301
22.4%$2,240.00
8465.96.00.51Splitting, slicing or paring machines › Other2.4%12.5% Section 301
7.5% Section 301
22.4%$2,240.00
8465.99.02.10Woodworking machines › Debarkers2.4%12.5% Section 301
25% Section 301
39.9%$3,990.00
8465.99.02.20Woodworking machines › Lathes2.4%12.5% Section 301
25% Section 301
39.9%$3,990.00
8465.99.02.30Woodworking machines › Other2.4%12.5% Section 301
25% Section 301
39.9%$3,990.00
8465.99.02.50Other › Other2.4%12.5% Section 301
25% Section 301
39.9%$3,990.00

What is and is not counted

LayerStatusNote
General (column 1) dutyIncludedUSITC Harmonized Tariff Schedule 2026HTSRev23
Section 301Included where a rule in our table appliesChina's older lists (Lists 1, 2, 3, 4A and the 2024 four-year-review increases) are loaded by product code with the exclusions now in force; the 2026 country action is loaded by country, with set totals for the EU, Japan, South Korea, Switzerland and Taiwan. Country-specific exemption lists (USMCA goods, CAFTA-DR textiles, UK and EU lists) are not modelled. Confirm each line with a broker. USTR: Section 301 investigations · USITC Harmonized Tariff Schedule, chapter 99
Section 232Partly included: plain-percentage rows are added, conditional and country-deal rates are shown but not addedPlain-percentage rows from the USITC chapter 99 notes are added, one row per line (vehicles and parts ahead of metals ahead of wood); conditional and country-deal rates are listed, not added. Light-vehicle parts and truck parts are both 25% and the schedule does not say whether a part on both lists pays once or twice: the site shows one. Official source: CBP: Section 232 steel and aluminum FAQs · Commerce (BIS): Section 232 investigations
IEEPA / reciprocalChecked: none in force foundWe found no IEEPA or reciprocal duty in force. The nine IEEPA tariff actions named in Executive Order 14389 were ended by it (signed 2026-02-20), and the temporary 10% Section 122 surcharge that followed was set to expire on 2026-07-24 with no extension found in the Federal Register. A Section 301 action that began on 2026-07-24 is counted in the Section 301 layer above. Canada has a separate Section 338 duty on some products; we cannot say which lines. Official source: Federal Register: Executive Order 14389, Ending Certain Tariff Actions · Federal Register: Proclamation 11012, temporary import surcharge · CBP: IEEPA tariff FAQs
Antidumping / countervailing (AD/CVD)1 may applyAntidumping and countervailing duty orders that MAY apply (1):
  1. A-570-803 · AD · China · Heavy Forged Hand Tools, With or Without Handles · official notice
The order's scope decides, not the tariff code; confirm with your broker or the official case page. Official source: CBP: antidumping and countervailing duty · Commerce (ITA): ACCESS case search · CBP: AD/CVD case data and search · Commerce: ADCVD proceedings

Rules applied to China

Section 232: what the proclamations say about chapter 84

These are summaries of the official proclamations. Where the tariff schedule notes give a plain percentage for your line and country, it is already in the duty above (see the layer list). Rates that depend on a fact only you know (the share of metal by weight, U.S.-made metal, a country deal, a USMCA claim) are listed but not added. Check your own line against the official list or ask your broker.

Semiconductors (certain advanced chips) in force

  • Federal Register document 2026-01052 (published 2026-01-20). USITC HTS 2026HTSRev23, U.S. note 39 and headings 9903.79.01 to 9903.79.09. +25% (heading 9903.79.01) on semiconductor articles of 8471.50, 8471.80 and 8473.30 that are a logic integrated circuit, or contain one, within two stated performance ranges (note 39(b)). Other products in those codes pay nothing extra (9903.79.02); so do chips for U.S. data centers, repairs, research, start-ups, consumer electronics, civil industrial use and public-sector use (9903.79.03 to .09). The schedule does not list heading 8542 chips.
  • Product list (added 2026-11-21): 3 code prefixes parsed from note 39(b). The performance ranges and uses cannot be read from the product code, so the row is listed and not added to totals.

Read from the proclamation on 2026-11-21. Sources: Federal Register document 2026-01052

Pending and recent notices for this heading

None of the notices we track names heading 8465 and China together. Many notices name only a program or a chapter, so also read all pending notices.